Synonyms: Perfluoro-1,3-dimethylcylcohexane
CAS Number : 335-27-3
Description & Characteristics
Flutec PP3, C8F16 is a fully-fluorinated, odourless, colourless liquid.
Applications
Flutec PP3 finds many applications including as a fluid for testing and cooling in the electronics industry and also as a fluid for curing low temperature cure resin systems and various energy transfer applications.
Safety, Handling and Storage
Although Flutec PP3 is considered biologically and chemically inert, good laboratory practice should be observed when handling. Flutec PP3 has an indefinite shelf life if properly stored in its original sealed container. Safety data sheets are available on request.
| Typical Physical Properties | |
| Boiling Point ℃ | 102 |
| Pour Point ℃ | -70 |
| Molecular Weight | 400 |
| Density, kg/l | 1.828 |
| Viscosity (kinematic), mm2/s | 1.06 |
| Viscosity, (dynamic), mPas | 1.919 |
| Surface Tension, mN/m | 16.6 |
| Vapour Pressure, mbar | 48 |
| Heat of vaporisation at Boiling Point, kj/kg | 82.9 |
| Specific Heat, kj/kg ℃ | 0.963 |
| Critical Temperature, ℃ | 241.5 |
| Critical Temperature, oK | 514.7 |
| Critical Pressure, bar | 18.81 |
| Critical Volume, l/kg | 1.520 |
| Resistivity ohm.cm | >1013 |
| Dielectric Breakdown Strength kV/mm 50Hz | >20 |
| Thermal Conductivity, mW/m ℃ | 60.4 |
| Expansion Coefficient, ℃-1(0℃) | 0.00123 |
Temperature dependant properties are quoted at 25℃ unless otherwise stated. The above typical physical properties, in no way form or represent product specification.
Click above button for print ready product data sheet
