Synonyms: Perfluoroperhydrophenanthrene
CAS Number : 306-91-2
Applications
Flutec PC11 finds many applications in the cosmetics industry where its addition to formulations can enhance protective and film-forming properties. When loaded with Oxygen it can delivery oxygen to the skin, and its density adds texture to lipsticks and hair products. It is possible to obtain very stable emulsions in glycerol, diglycerol and other polyhydric emulsifying agents.
Safety, Handling and Storage
Although Flutec PC11 is considered biologically and chemically inert, good laboratory practice should be observed when handling. Flutec PC11 has an indefinite shelf life if properly stored in its original sealed container. Safety data sheets are available on request.
| Typical Physical Properties | |
| Boiling Point ℃ | 215 |
| Pour Point ℃ | -20 |
| Molecular Weight | 624 |
| Density, kg/l | 2.03 |
| Viscosity (kinematic), mm2/s | 14 |
| Viscosity, (dynamic), mPas | 28.4 |
| Surface Tension, mN/m | 19 |
| Vapour Pressure, mbar | <1 |
| Heat of vaporisation at Boiling Point, kj/kg | 68* |
| Specific Heat, kj/kg ℃ | 1.07* |
| Critical Temperature, ℃ | 377* |
| Critical Temperature, oK | 650* |
| Critical Pressure, bar | 14.6* |
| Critical Volume, l/kg | 1.58* |
| Resistivity ohm.cm | >1013 |
| Dielectric Breakdown Strength kV/mm 50Hz | >13 |
| Thermal Conductivity, mW/m ℃ | 52.6* |
| Expansion Coefficient, ℃-1(0℃) | 0.00075 |
Temperature dependant properties are quoted at 25℃ unless otherwise stated. The above typical physical properties, in no way form or represent product specification.
Click above button for print ready product data sheet
