Flutec PP10,C13F22, is a fully-fluorinated, odourless, colourless, non-volatile liquid with the following characteristics:
- Compatibility with most construction materials
- Excellent chemical and thermal stability
- Non flammability
- Practically non-toxic1
Applications
Flutec PP10 finds many applications as a fluid for use in the electronics industries, including vapour phase soldering, condensation inert heating, fluid for testing and direct contact cooling.
Safety, Handling and Storage
Although Flutec PP10 is considered biologically and chemically inert, good laboratory practice should be observed when handling. Flutec PP10 has an indefinite shelf life if properly stored in its original sealed container. Safety data sheets are available on request.
Typical Physical Properties |
Boiling Point ℃ |
194 |
Pour Point ℃ |
-40 |
Molecular Weight |
574 |
Density, kg/l |
1.984 |
Viscosity (kinematic), mm2/s |
4.84 |
Viscosity, (dynamic), mPas |
9.58 |
Surface Tension, mN/m |
19.7 |
Vapour Pressure, mbar |
<1 |
Heat of vaporisation at Boiling Point, kj/kg |
71* |
Specific Heat, kj/kg ℃ |
0.92* |
Critical Temperature, ℃ |
357.2* |
Critical Temperature, oK |
630.2* |
Critical Pressure, bar |
16.2* |
Temperature dependant properties are quoted at 25℃ unless otherwise stated.
The above typical physical properties, in no way form or represent product specification.
Click above button for print ready product data sheet