Flutec PP25, C17F30, is a fully-fluorinated, odourless, colourless, non-volatile liquid wi:th the following characteristics
- Compatibility with most construction materials
- Excellent chemical and thermal stability
- Non flammability
- Practically non-toxic1
Applications
Flutec PP25 finds many applications in the electronics industry including as a fluid for vapour phase soldering of higher melting point solders and in condensation inert heating equipment for curing resin systems or melting higher melting point thermoplastic powder coats.
Safety, Handling and Storage
Although Flutec PP25 is considered biologically and chemically inert, good laboratory practice should be observed when handling. Flutec PP25 has an indefinite shelf life if properly stored in its original sealed container. Safety data sheets are available on request.
Typical Physical Properties |
Boiling Point ℃ |
260 |
Pour Point ℃ |
-10 |
Molecular Weight |
774 |
Density, g/l |
2.049 |
Viscosity (kinematic), mm2/s |
56.1 |
Viscosity, (dynamic), mPas |
114.5 |
Surface Tension, mN/m |
19.4 |
Vapour Pressure, mbar |
<1 |
Heat of vaporisation at Boiling Point, kj/kg |
67.9* |
Specific Heat, kj/kg ℃ |
0.957* |
Critical Temperature, ℃ |
400.4* |
Critical Temperature,°K |
673.6* |
Critical Pressure, bar |
11.34 |
Critical Volume, l/kg |
1.574* |
Resistivity ohm.cm |
>1013 |
Thermal Conductivity, mW/m ℃ |
63.8* |
Expansion Coefficient, ℃-1(0 ℃) |
0.00084 |
Temperature dependant properties are quoted at 25℃ unless otherwise stated.
The above typical physical properties, in no way form or represent product specification.
Click above button for print ready product data sheet